硬件和软件设计
HARDWARE AND SOFTWARE DESIGN
专注硬科技
创新的孵化机构
Mainstream hard technology
Innovative incubation institutions
- 硬件设计师的切入通常分为两个时间段：
- 一是先根据功能需求制作主板，再进行整体外形的工业设计；二是先做整体外形的工业设计，主板再随型设计。
- 本次我们采用的是第二种方案。软件设计师同时加入，他们共同进行设计、打样、测试，以保障整体性能的稳定和可控。-结构设计-在硬件和软件启动的时候，结构设计师也入场了，他们从工业设计师手中接过三维数据模型，根据提前议定的生产方式进行详细的结构设计。
- 他们主要解决产品批量生产可行性的问题，所以每一个部件都会有具体的解决方案，比如电池。电池既要独立密封，又要更换方便快捷，还要有足够的续航能力，还还要符合空运标准。既要又要还要...还还要！
- The hardware designer's entry is usually divided into two periods:
- First, according to the functional requirements of the motherboard, and then the overall shape of the industrial design; The second is to do the overall shape of the industrial design, the main board and then with the type design.
- This time we use the second option. The software designer is joined at the same time, and they jointly design, proofing, and testing to ensure the stability and control of the overall performance. - Structural design - When the hardware and software are launched, the structural designers also enter, they take over the three-dimensional data model from the industrial designers, and carry out detailed structural design according to the agreed production mode in advance.
- They mainly solve the problem of the feasibility of mass production of products, so each component will have a specific solution, such as batteries. The battery should not only be independently sealed, but also be easily and quickly replaced, but also have sufficient battery life, and also meet air standards. Both want and want... More!
